Browse all practice questions for the Type Rating Law Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Type Rating Law Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • A circling approach is:
  • Which statement correctly defines the Transition Level?
  • Which sequence lists the segments that can be part of an instrument approach procedure?
  • The term used to describe the visual phase of flight after completing an instrument approach, to position for landing on a runway not suitable for straight-in, is what?
  • What is the term for a turn executed during the initial approach between the end of the outbound track and the beginning of the intermediate or final approach track, where the tracks are not reciprocal?
  • What is the outbound time in a holding pattern at 14000 ft or below in still air conditions?
  • When does the currency period for a medical assessment begin?
  • How can a candidate verify the validity of their type rating after completion?
  • How does an operator's standardization program interact with individual type ratings?
  • Who may administer the type rating checkride besides a Designated Pilot Examiner?
  • Which statement is NOT true regarding runway safety features?
  • Which signal is used by a signalman to indicate parking brakes should be applied?
  • Under which conditions may an aircraft on a straight-in VOR approach continue its descent below the OCA?
  • What is the relationship between a type rating and the broader airman certificate?
  • How can enforcement actions be initiated for Type Rating violations?
  • What basic information does a knowledge test for a type rating usually cover?
  • In Class B airspace above 10,000' MSL, the VMC minima require which of the following horizontally?
  • What documents are issued upon successful completion of a type rating course?
  • What are consequences of falsification during type rating certification?
  • What distinguishes a 'type rating' from other ratings on a certificate?
  • For an instrument departure (SID) what is the procedure design gradient (PDG)?
  • What is the colour of runway edge lights?
  • The MDH cannot be lower than which reference in a straight-in approach?
  • For ILS obstacle clearance surfaces, pilots are assumed to not deviate from the centreline by more than what deflection?
  • Which of the following is not typically part of a standard type rating training program?
  • What is 'differences training' in the context of type ratings?
  • How are foreign type ratings treated when operating in the United States?
  • What typically happens after completing the type rating training before acting as PIC?
  • Which statement accurately describes how a type rating appears on the airman certificate?
  • Taxiway markings and aircraft stand markings are which color?
  • Who is primarily responsible for developing contingency procedures for engine failure after V1?
  • Which term describes the turn executed during the initial approach where the end of the outbound track meets the beginning of the intermediate or final track, and the tracks are not reciprocal?
  • Which description describes a Location sign?
  • In a precision approach, glide path interception typically occurs at heights above runway elevation in which range?
  • What does ACS stand for and how does it apply to type rating tests?
  • Loading limitations shall include which elements?
  • What is the role of a Designated Pilot Examiner (DPE) in type rating testing?
  • Which of the following best completes the ICAO Annex 17 definition of Security?
  • An aircraft shall display an anti-collision light:
  • In a precision approach (ILS), the final approach segment begins at which point?
  • What is the principal requirement for a signals area on an aerodrome?
  • If a new variant introduces major avionics changes, which training becomes necessary?
  • Which statement is true about type rating currency?
  • Runway end lights shall be:
  • How should candidates prepare to ensure compliance with type rating regulatory requirements?
  • Margin added to the OCA for a non-precision approach is based on which consideration?
  • Runway direction is indicated by two digits; the units are expressed to the nearest 10 degrees of which reference?
  • If unidentified baggage is found at an airport, which action is required?
  • Which of the following best describes the scope of the knowledge test for a type rating?
  • Which statement best describes the purpose of a DPE's endorsements after successful type rating checkrides?
  • What does the instructor's endorsement signify in type rating training?
  • What prerequisites must be satisfied before beginning type rating training?
  • What is the function of operating limitations that may accompany a type rating?
  • Which operations are most likely to require a type rating beyond a standard certificate?
  • In hijack scenario, altitude deviation: The correct step is to continue at altitude that differs from semicircular rule with 1000 ft above FL290 and 500 ft below.
  • If the accident or serious incident occurs in the territory of a non-Contracting State and Annex 13 is not intended to be followed, which statement is correct?
  • What is the term describing a manoeuvre in which a turn is made away from a designated track followed by a turn in the opposite direction to intercept the reciprocal of the designated track?
  • Which class of ATS airspace requires IFR separation from both IFR and VFR flights?
  • If a pilot falsifies information during type rating certification, what may occur aside from penalties?
  • For holders of an aircraft transport pilot licence who have passed their 40th birthday, the medical examination interval is shortened to what?
  • Differences training is designed to address which aspect when operating a new airframe?
  • With respect to unlawful interference, which statement is correct?
  • What does the checkride endorsement signify?
  • Where does the intermediate missed approach segment end?
  • In the transition layer, how should the aircraft's vertical position be expressed?
  • In the event of an onboard offence suspected, the aircraft commander may deliver such person to the competent authorities.
  • For a non-precision straight-in approach, the angle between the final approach track and the runway centreline must be which of the following?
  • A radial is:
  • Which agencies typically set the standards for type rating training and testing in the United States and Europe?
  • What is the importance of "recency of experience" in type rating operations?
  • The 'stopway' is defined as an area on the end of takeoff run available prepared as a suitable area where:
  • Which statement best describes the signing of a type rating training endorsement?
  • A straight departure is one in which the initial departure track does not deviate from the alignment of the extended runway centre line by more than:
  • What best describes currency after earning a type rating?
  • Are there exemptions or waivers related to type ratings?
  • What is 'variant transition' training and when is it required?
  • What topics are typically included in a type rating knowledge test?
  • In airspace where IFR and VFR are permitted and IFRs are separated from IFRs and from VFRs, with VFRs separated from IFRs and provided traffic information on other VFR flights, what is this airspace?
  • What distinguishes an initial type rating exam from a renewal or recurrent type rating exam?
  • Which regulatory framework governs type ratings in the United States?
  • Who conducts the type rating practical test in most regulatory frameworks?
  • Which statement describes when differences training is required?
  • How is a paved pre-threshold area greater than 60 m in length but not suitable for use by aircraft marked?
  • Who is generally responsible for ensuring an ATC clearance provides safe terrain clearance?
  • What are the main components of a type rating training program?
  • In navigation terms, which option best describes a radial?
  • During instrument departure planning, which gradient is assumed for all engines operating?
  • In a standard holding pattern, the default turn direction is:
  • In a precision approach, the final approach segment begins at which point?
  • When acting as a co-pilot under supervision, the flight time credits toward a higher grade licence are credited in what manner?
  • Which signal indicates parking brakes should be applied?
  • Which ATS airspace classification permits IFR and VFR, with IFRs under ATC service and all flights receiving traffic information as far as is practical?
  • What is the importance of emergency procedures in the type rating checkride?
  • The period of the new proficiency check may be completed by which date in the same year?
  • Which ATS airspace class permits IFR and VFR operations and requires separation between all flights?
  • What happens if a pilot's airman certificate is suspended or revoked—does the type rating disappear?
  • An aircraft subjected to unlawful interference (hijacked) and forced to divert without ATS communication shall try to:
  • What is the purpose of using a Flight Simulator Training Device in type rating training?
  • A circling approach is described as which of the following?
  • When an accident occurs in the territory of a Contracting State, the investigation will be done by which State?
  • What are typical indicators that differences training is required when a new variant is introduced?
  • An aircraft flying IFR in unlimited visibility with total radio failure should do what?
  • The licensing question about co-pilot flight time credits toward higher grade licences is best described as which of the following?
  • What does the acronym PDG stand for in SID design?
  • Which of the following group shows the correct designators for three parallel runways seen from the direction of the approach?
  • The colour of a runway designation marking on a paved runway shall be which color?
  • What is the role of the regulatory authority in maintaining type rating standards?
  • The period for a proficiency check may not exceed which date in the same year?
  • OCA is referenced to:
  • Member states should designate an appropriate authority to maintain a national aviation security programme that applies to which of the following?
  • Which term shows left-to-right labeling of three parallel runways seen from the approach direction?
  • In offset entry above 14,000 ft in still air, the outbound time on a 30° offset track is limited to which duration?
  • How is a type rating reflected on an airman certificate?
  • Taxiway centreline lights on a taxiway other than an exit taxiway shall be fixed lights showing which color?
  • What is the typical format of a type rating practical test?
  • For a turning departure, turns may be specified at:
  • Under what condition is a type rating required to act as PIC?
  • Which statement about differences/transition training is true?
  • How do regulatory authorities treat modifications that require a new or revised type rating?
  • What does an initial type rating exam certify?
  • Who administers the practical checkride for a type rating?
  • What is the difference between currency and a type rating?
  • Which document establishes the national aviation security programme?
  • Can a foreign-licensed pilot convert to a U.S. type rating, and if so, how?
  • If a controlled flight deviates from its track, which action would be considered not appropriate?
  • When should the altimeter setting be changed from QNH to Standard during a climb conducted under IFR?
  • The national aviation security programme should apply to which operations?
  • What do alternating green/yellow centreline lights along a taxiway mean?
  • Who passes the Transition Level to aircraft?
  • Who should designate the appropriate authority responsible for the development, implementation, and maintenance of a national aviation security programme?
  • For Class B airspace above 10,000' MSL, what are the VMC minima in terms of horizontal distance, vertical distance, and visibility?
  • Based on operational considerations, a margin may be added to the OCA of a non-precision approach. The result is then called:
  • Which entity issues type rating endorsements after tests?
  • What is the typical content of the normal procedures evaluation in a type rating checkride?
  • Which ATS airspace classification allows IFR and VFR, with IFRs separated from other IFRs and from VFRs, and VFRs separated from IFRs with traffic information about other VFRs?
  • Outbound time for a holding pattern at 14,000 ft or below in still air conditions is how long?
  • What is the significance of "MEL/AD" in the context of maintaining a type rating?
  • ASDA (Acceleration Stop Distance Available) is defined as which of the following?
  • Mandatory signs consist of an inscription in what color on a background of what color?
  • In a straight-in approach, the MDH cannot be below which reference?
  • TOD A equals takeoff distance available plus what, if provided?
  • The documents for entry and departure of aircraft are marked by which guideline for acceptance?
  • After earning a new type rating, what is commonly required to maintain proficiency?
  • The Crew Member Certificate (CMC) shall be accepted by each Contracting State for identification purposes in combination with which of the following?
  • Which of the following statements about type ratings is true?
  • One of the conditions to descent below the MDA on a circling approach is:
  • Runway threshold lights shall be:
  • How do FAA and EASA approaches to type ratings differ for the same aircraft?
  • The minimum obstacle clearance at the departure end of runway equals:
  • The principal requirement for a signals area on an aerodrome is that it must be clearly visible from which location?
  • In an ATS airspace where IFR and VFR are permitted and IFR flights are under ATC with traffic information provided as far as practical, this airspace is classified as which?
  • What is the function of the Type Certificate Data Sheet (TCDS) in relation to type ratings?
  • Runway end lights shall be fixed unidirectional lights showing red in the direction of the runway.
  • What is the minimum obstacle clearance in the primary area of the initial approach segment?
  • What is required for a type rating to be valid for flight operations?
  • What does the knowledge endorsement certify in a type rating process?
  • Below and at the transition altitude, the altimeter setting should be:
  • An aircraft shall display an anti-collision light:
  • For SSR transponder mode/code acknowledgment, what is required of pilots?
  • What is the difference between a knowledge test and a practical test in type rating certification?
  • Which aircraft are typically covered by a type rating (in the U.S.)?
  • What actions can the FAA take if a pilot operates without a valid type rating?
  • When a controlled flight deviates from its track, what is the recommended action?
  • Who has the final authority as to the disposition of the aircraft?
  • Which statement accurately links training requirements to a new or revised aircraft modification?
  • A ___ is defined as an area of specified dimensions enclosing a runway and taxiway to provide for the safety of aircraft operations.
  • Which statement best describes the purpose of earning a type rating versus currency?
  • In what circumstances is an instructor required to sign a training endorsement for a type rating?
  • The validity of the instrument rating is how many years?
  • TODA take-off distance available is:
  • If a stepdown fix is established on the final approach track, the descent shall be made so as to:
  • What type of training records must a training provider maintain for type ratings?
  • Circling can be performed as long as which condition is met?
  • Definition of Security, according to ICAO Annex 17, is a combination of measures:
  • An area symmetrical about the extended runway centreline and adjacent to the end of the strip primarily intended to reduce the risk of damage to an aeroplane undershooting or overrunning the runway is the definition for:
  • ASDA stands for Acceleration Stop Distance Available. Which components are included in its definition?
  • Which statement accurately describes the color of a Location sign?
  • What statement best describes how a type rating is tied to certification?
  • An aircraft flying IFR in unlimited visibility with total radio failure should do what?
  • The obstacle clearance value of 300 meters is approximately how many feet?
  • How is the airman certificate language updated to reflect a new type rating?
  • Who is responsible for the development of the contingency procedures required to cover the case of engine failure during an instrument departure, which occurs after V1?
  • What is the primary purpose of a type rating in aviation regulation?
  • If the location of an accident cannot be established as being in the territory of any State, which state should conduct the investigation?
  • What must a pilot do if they modify the aircraft they are rated for, affecting the type rating?
  • Who is responsible for ensuring ATC clearances consider terrain clearance?
  • Which statement is true about threshold lighting color designations as seen from the approach?
  • For straight-in non-precision approaches, the angle deviation threshold is no greater than how many degrees?
  • What is the general process to obtain a type rating for a newly certified model?
  • What color are taxiway markings and aircraft stand markings?
  • Which term describes the area at the end of the runway intended to reduce damage from undershoot or overrun?
  • The term used to describe the visual phase of flight after completing an instrument approach, to bring an aircraft into position for landing on a runway which is not suitably located for straight-in approach, is:
  • In a standard holding pattern, turns are made:
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy